Ruijie RG-AP130(W2) V2 Wall Access Point AC Wave 2, 1.167Gbps, 4 Port Gigabit, Cloud Control
คุณสมบัติสินค้า:
SKU : RG-AP130(W2) V2
Ruijie RG-AP130(W2) V2 Wall-Mountable Wireless AP AC Dual-Band 2x2 MU-MIMO ความเร็วสูงสุด 1.167Gbps, 4 Port Lan Gigabit, รองรับการ Control แบบ Stanalone, Free Cloud Control, Hardware Control
แบรนด์ : Ruijie
Share
Ruijie RG-AP130(W2) V2
| Target Deployments | For wireless deployment in hotels, offices, residential buildings |
| Radio | Concurrent dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac |
| Operating Bands | 2.4GHz and 5GHz |
| Antenna | Built-in omnidirectional antenna (Base gain 3.5dBi) 2×2 MIMO |
| Max Throughput | 1.167Gbps |
| Spatial Streams | 2 |
| IP Rating | IP41 |
| Service Port | Front: 4 10/100/1000M Ethernet ports Rear: 1 10/100 /1000M uplink port |
| Power Supply | PoE (802.3af) |
| Power Consumption | <8W |
| Maximum clients per AP | 32 |
| BSSID capacity | 16 |
| SSID hiding | Support |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| Intelligent load balancing based on the number of users or traffic | Support |
| LED Indicators | 1 LED status indicator |
| Maximum clients per AP | Up to 32 |
| BSSID capacity | Up to 8 per radio Up to 16 per AP |
| SSID hiding | Support |
| Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| Intelligent identification of smart device | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| IPv4 address | Static IP address or DHCP reservation |
| IPv6 address | Manual or automatic configuration |
| Multicast | Multicast to unicast conversion |
| Network management | SNMP v1/qav2C/v3, Telnet, TFTP, Web management |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| Safety Standard | GB4943 EN/IEC 60950-1 |
| Dimensions (W x D x H) (mm) | 116 × 86 × 42 |
| Weight | 0.23kg |
| Installation Mode | Standard 86-type faceplate installation |
| Power Supply | Not Include PoE (802.3af), Local DC power supply |
| Power Consumption | <8W |
| Temperature | Operating Temperature: -10°C to 45°C Storage Temperature: -40°C to 70°C |
| Humidity | Operating Humidity: 5% to 95% (non-condensing) Storage Temperature: 5% to 95% (non-condensing) |
| ประกัน | 3ปี |
Powered by
MakeWebEasy.com